A single seat of LASERGUIDE software provides functions that would require many seats and setups of software from other laser suppliers. LASERGUIDE software supports unique capabilities that reduce the time, skill and effort required to accurately and efficiently manufacture parts.
LASERGUIDE can read any 3D point data. Existing laser projection files from other systems are easily and automatically converted into LASERGUIDE projection files. Aligned Vision provides custom modifications and configurations when desired.
LASERGUIDE software works with LASERGUIDE and MicroLASERGUIDE projectors, and it is backwards compatible with older generation projectors. The software is able to use standard Virtek ply files without any modification.
Specifications Data Compatibility: Fibersim, TruLaser, Verisurf, metrology data Virtek ply projection files and other CAD & NC data Hardware: Industrial computer with monitor, keyboard, and a mouse, uninterruptable power supplies, Wireless Access Point, Ethernet switch Software LASERGUIDE software Operating System: Windows XP, Windows 2000, Windows Vista, Windows 7 Supports: 3 levels of operator privileges, event logging for statistical analysis Simultaneous Active Data Files: 8 Projectors Supported: 20/system, any configuration of LASERGUIDE and MicroLASERGUIDE projectors. Targets per Projector: (4-24) 6 recommended, targets can be shared between projectors Remotes Supported: 8 Optional: ProjectorVision, Automatic Ply Verification (APV), AutoAim/AutoFocus, Wireless Other Options Available: Mounting Structures Computer Console Billboards Barcode Readers (2) Additional Targets
LaserGuide 3D Laser Templating
LASERGUIDE's unique Multitasking capability enables one controller to support multiple LASERGUIDE projectors performing multiple jobs at the same time. Each individual projector displays multiple simultaneous jobs. Each job is controlled by an individual remote control.
Full Multitasking capabilities. Lowest cost for hardware and software. The only laser system supporting inspection functions approved by FAA and DoD.
Aligned Vision's LaserVision is setting the new standard in laser templating by combining a camera with the laser to provide a vision system to monitor and verify ply orientation, perform FOD detection and verify ply boundaries. See the article in CompositesWorld.
LASERGUIDE is the easiest to use, most flexible, powerful laser projection system available. Whether it is used in an aerospace or a marine application, for composite layup or fixture location, LASERGUIDE saves time, improves accuracy and provides rapid return on investment. LASERGUIDE systems require fewer projectors, controllers, and operator setup activities than any other laser system available.